01/24/2010
| DETAIL ETCHING KIT FOR ATLAS N-SCALE C628/C630 |
In the photo above and below are kit parts: battery box steps, side steps, foot boards and sinclair antenna. In
the background is the hood top running board. What you cannot see here is the horn bracket. The horn is a
kitbashed from an Atlas C420 horn.
the background is the hood top running board. What you cannot see here is the horn bracket. The horn is a
kitbashed from an Atlas C420 horn.
In this view you can get a better view of the horn bracket and a side shot of the antenna. The white blocks
under the battery box steps are 0.060" x 0.060" styrene strip. Prototype photos show a support structure
under these steps.
under the battery box steps are 0.060" x 0.060" styrene strip. Prototype photos show a support structure
under these steps.
This photo is primarily of the hood top running board. You can see here also the reconstruction of the
radiator section. The frets have been designed and when I receive them, the radiator section will be
completed.
As of 04/07/2010, the drawings are at the etching shop.
I have four test models to build of the C630 and one of the C628. The C628 will be a PC unit. The C630's will
consist of two PC units and one RDG unit.
radiator section. The frets have been designed and when I receive them, the radiator section will be
completed.
As of 04/07/2010, the drawings are at the etching shop.
I have four test models to build of the C630 and one of the C628. The C628 will be a PC unit. The C630's will
consist of two PC units and one RDG unit.